Macromolecular Science & Engineering Publications

Friday, January 1, 2016

Structure-Properties Relationship of a Novel Multilayer Film/Foam Material Produced through Co-extrusion and Orientation

Baer, E., Wu, H., Zhang, J., Zhang, C., Feng, J., & Rahman, M. (2016). Structure-Properties Relationship of a Novel Multilayer Film/Foam Material Produced through Co-extrusion and Orientation. J. Industrial @ Eng. Chem. Research , 55 (), 10947-10954.

Friday, January 1, 2016

Effect of organoclay as a compatibilizer in poly(lactic acid) and natural rubber blends

Ock, H., Kim, D., Ahn, K., Lee, S., & Maia, J. M. (2016). Effect of organoclay as a compatibilizer in poly(lactic acid) and natural rubber blends. European Polymer Journal [00143057], 76 (), 216-227.

Friday, January 1, 2016

Material heterogeneity in cancellous bone promotes deformation recovery after mechanical failure

Torres, A., Matheny, J., Keaveny, T., Taylor, D., Rimnac, C. M., & Hernandez, C. (2016). Material heterogeneity in cancellous bone promotes deformation recovery after mechanical failure. Proceedings of the National Academy of Sciences of the United States of America [00278424], 113 (11), 2892-2897.

Friday, January 1, 2016

Biomass-Based Mechanically Strong and Electrically Conductive Polymer Aerogels and Their Application for Supercapacitors

Zhao, H., Yuan, L., Fu, Z., Wang, C., Yang, X., Zhu, J., ... Schiraldi, D. A. (2016). Biomass-Based Mechanically Strong and Electrically Conductive Polymer Aerogels and Their Application for Supercapacitors. ACS Applied Materials & Interfaces [19448244], 8 (15), 9917-9924.

Friday, January 1, 2016

Grafting of a Stimuli Responsive Polymer on Nanolayered Coextruded PS/PCL Films by Surface Initiated Polymerization

Pangilinan, K., De Leon, A., Mangadlao, J., Baer, E., & Advincula, R. C. (2016). Grafting of a Stimuli Responsive Polymer on Nanolayered Coextruded PS/PCL Films by Surface Initiated Polymerization. Macromolecular Materials and Engineering [14387492], 301 (7), 870-875.

Friday, January 1, 2016

Effect of Soft-to-Hard Segment Ratio on Viscoelastic Behavior of Model Thermoplastic Polyurethanes during Phase Transitions

Gadley, J., Andrade, R., & Maia, J. M. (2016). Effect of Soft-to-Hard Segment Ratio on Viscoelastic Behavior of Model Thermoplastic Polyurethanes during Phase Transitions. Macromolecular Materials and Engineering [14387492], 301 (8), 953-963.

Friday, January 1, 2016

Clay Aerogel Supported Palladium Nanoparticles as Catalysts

Griebel, J., Gawryla, M., Milliman, H., & Schiraldi, D. A. (2016). Clay Aerogel Supported Palladium Nanoparticles as Catalysts. Gels [23102861], 2 (2).

Friday, January 1, 2016

High performance polymer nanocomposites for additive manufacturing applications

De Leon, A., Chen, Q., Palaganas, N., Palaganas, J., Manapat, J., & Advincula, R. C. (2016). High performance polymer nanocomposites for additive manufacturing applications. Reactive and Functional Polymers [13815148], 103 (), 141-155.

Friday, January 1, 2016

Reactive Extrusion Strategies to Fabricate Magnetite-Polyethylene Nanocomposites with Enhanced Mechanical and Magnetic Hyperthermia Properties

Situ, S., Cao, J., Chen, C., Abenojar, E., Maia, J. M., & Samia, A. (2016). Reactive Extrusion Strategies to Fabricate Magnetite-Polyethylene Nanocomposites with Enhanced Mechanical and Magnetic Hyperthermia Properties. Macromolecular Materials and Engineering [14387492], 301 (12), 1525-1536.

Friday, January 1, 2016

Chemorheology of thermoplastic polyurethane and thermoplastic polyurethane/carbon nanotube composite systems

Solouki Bonab, V., & Manas-Zloczower, I. (2016). Chemorheology of thermoplastic polyurethane and thermoplastic polyurethane/carbon nanotube composite systems. Polymer [00323861], 99 (), 513-520.

Friday, January 1, 2016

Highly Efficient Flame Retardant Polyurethane Foam with Alginate/Clay Aerogel Coating

Chen, H., Shen, P., Chen, M., Zhao, H., & Schiraldi, D. A. (2016). Highly Efficient Flame Retardant Polyurethane Foam with Alginate/Clay Aerogel Coating. ACS Applied Materials & Interfaces [19448244], 8 (47), 32557-32564.

Friday, January 1, 2016

High-throughput in vitro assay to evaluate the cytotoxicity of liberated platinum compounds for stimulating neural electrodes

Kovach, K., Kumsa, D., Srivastava, V., Hudak, E., Untereker, D., Kelley, S., ... Capadona, J. R. (2016). High-throughput in vitro assay to evaluate the cytotoxicity of liberated platinum compounds for stimulating neural electrodes. Journal of Neuroscience Methods [01650270], 273 (), 9-Jan.

Friday, January 1, 2016

pH triggered smart organogel from DCDHF-Hydrazone molecular switch

Khattab, T., Tiu, B., Adas, S., Bunge, S., & Advincula, R. C. (2016). pH triggered smart organogel from DCDHF-Hydrazone molecular switch. Dyes and Pigments [01437208], 130 (), 327-336.

Friday, January 1, 2016

Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates: Rheological and Thermal Behaviors of PLA with Bis-EMA Crosslinking

Yamoum, C., Maia, J. M., & Magaraphan, R. (2016). Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates: Rheological and Thermal Behaviors of PLA with Bis-EMA Crosslinking. Polymers for Advanced Technologies [10427147], 28 (1), 102-112.

Friday, January 1, 2016

Curing Kinetics of Biobased Epoxies for Tailored Applications

Patel, A., Maiorana, A., Yue, L., Gross, R., & Manas-Zloczower, I. (2016). Curing Kinetics of Biobased Epoxies for Tailored Applications. Macromolecules [00249297], 49 (15), 5315-5324.

Friday, January 1, 2016

Nonflammable Alginate Nanocomposite Aerogels Prepared by a Simple Freeze-Drying and Post-Cross-Linking Method

Shang, K., Liao, W., Wang, J., Wang, Y., Wang, Y., & Schiraldi, D. A. (2016). Nonflammable Alginate Nanocomposite Aerogels Prepared by a Simple Freeze-Drying and Post-Cross-Linking Method. ACS Applied Materials & Interfaces [19448244], 8 (1), 643-650.

Friday, January 1, 2016

Polymers for proppants used in hydraulic fracturing

Pangilinan, K., De Leon, A., & Advincula, R. C. (2016). Polymers for proppants used in hydraulic fracturing. Journal of Petroleum Science and Engineering [09204105], 145 (), 154-160.

Friday, January 1, 2016

Benzoxazines with enhanced thermal stability from phenolated organosolv lignin

Abarro, G., Podschun, J., Diaz, L., Ohashi, S., Saake, B., Lehnen, R., ... Ishida, H. (2016). Benzoxazines with enhanced thermal stability from phenolated organosolv lignin. RSC Advances [20462069], 6 (109), 107689-107698.

Friday, January 1, 2016

Effects of Structural Variations on the Cellular Response and Mechanical Properties of Biocompatible, Biodegradable, and Porous Smectic Liquid Crystal Elastomers

Sharma, A., Mori, T., Mahnen, C., Everson, H., Leslie, M., Nielsen, A., ... Hegmann, E. (2016). Effects of Structural Variations on the Cellular Response and Mechanical Properties of Biocompatible, Biodegradable, and Porous Smectic Liquid Crystal Elastomers. Macromolecular Bioscience [16165187], ().

Friday, January 1, 2016

Effect of carbon nanotube dispersion and network formation on thermal conductivity of thermoplastic polyurethane/carbon nanotube nanocomposites

Pircheraghi, G., Powell, T., Solouki Bonab, V., & Manas-Zloczower, I. (2016). Effect of carbon nanotube dispersion and network formation on thermal conductivity of thermoplastic polyurethane/carbon nanotube nanocomposites. Polymer Engineering and Science [00323888], 56 (4), 394-407.

Friday, January 1, 2016

Tough Polymer Aerogels Incorporating a Conformal Inorganic Coating for Low Flammability and Durable Hydrophobicity

Sun, C., Schiraldi, D. A., Chen, D., Wang, D., & Sánchez-Soto, M. (2016). Tough Polymer Aerogels Incorporating a Conformal Inorganic Coating for Low Flammability and Durable Hydrophobicity. ACS Applied Materials & Interfaces [19448244], 8 (20), 13051-13057.

Friday, January 1, 2016

Pyrene-imprinted polythiophene sensors for detection of polycyclic aromatic hydrocarbons

Tiu, B., Krupadam, R., & Advincula, R. C. (2016). Pyrene-imprinted polythiophene sensors for detection of polycyclic aromatic hydrocarbons. Sensors and Actuators, B: Chemical [09254005], 228 (), 693-701.

Friday, January 1, 2016

Carbon Aerogels with Excellent CO 2 Adsorption Capacity Synthesized from Clay-Reinforced Biobased Chitosan-Polybenzoxazine Nanocomposites

Alhwaige, A., Ishida, H., & Qutubuddin, S. (2016). Carbon Aerogels with Excellent CO 2 Adsorption Capacity Synthesized from Clay-Reinforced Biobased Chitosan-Polybenzoxazine Nanocomposites. ACS Sustainable Chemistry & Engineering [21680485], 4 (3), 1286-1295.

Friday, January 1, 2016

Molecular Design: Network Architecture and Its Impact on the Organization and Mechanics of Peptide-Polyurea Hybrids

Matolyak, L., Keum, J., & Korley, L. T. (2016). Molecular Design: Network Architecture and Its Impact on the Organization and Mechanics of Peptide-Polyurea Hybrids. Biomacromolecules, 17 (12), 3931-3939.

Friday, January 1, 2016

Melt Compounding of Thermoplastic Polyurethanes Incorporating 1D and 2D Carbon Nanofillers

Yuan, D., Pedrazzoli, D., Pircheraghi, G., & Manas-Zloczower, I. (2016). Melt Compounding of Thermoplastic Polyurethanes Incorporating 1D and 2D Carbon Nanofillers. Polymer - Plastics Technology and Engineering [03602559], ().

Case School of Engineering

Macromolecular Science & Engineering

Macromolecular Science & Engineering Publications

Structure-Properties Relationship of a Novel Multilayer Film/Foam Material Produced through Co-extrusion and Orientation

Effect of organoclay as a compatibilizer in poly(lactic acid) and natural rubber blends

Material heterogeneity in cancellous bone promotes deformation recovery after mechanical failure

Biomass-Based Mechanically Strong and Electrically Conductive Polymer Aerogels and Their Application for Supercapacitors

Grafting of a Stimuli Responsive Polymer on Nanolayered Coextruded PS/PCL Films by Surface Initiated Polymerization

Effect of Soft-to-Hard Segment Ratio on Viscoelastic Behavior of Model Thermoplastic Polyurethanes during Phase Transitions

Clay Aerogel Supported Palladium Nanoparticles as Catalysts

High performance polymer nanocomposites for additive manufacturing applications

Reactive Extrusion Strategies to Fabricate Magnetite-Polyethylene Nanocomposites with Enhanced Mechanical and Magnetic Hyperthermia Properties

Chemorheology of thermoplastic polyurethane and thermoplastic polyurethane/carbon nanotube composite systems

Highly Efficient Flame Retardant Polyurethane Foam with Alginate/Clay Aerogel Coating

High-throughput in vitro assay to evaluate the cytotoxicity of liberated platinum compounds for stimulating neural electrodes

pH triggered smart organogel from DCDHF-Hydrazone molecular switch

Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates: Rheological and Thermal Behaviors of PLA with Bis-EMA Crosslinking

Curing Kinetics of Biobased Epoxies for Tailored Applications

Nonflammable Alginate Nanocomposite Aerogels Prepared by a Simple Freeze-Drying and Post-Cross-Linking Method

Polymers for proppants used in hydraulic fracturing

Benzoxazines with enhanced thermal stability from phenolated organosolv lignin

Effects of Structural Variations on the Cellular Response and Mechanical Properties of Biocompatible, Biodegradable, and Porous Smectic Liquid Crystal Elastomers

Effect of carbon nanotube dispersion and network formation on thermal conductivity of thermoplastic polyurethane/carbon nanotube nanocomposites

Tough Polymer Aerogels Incorporating a Conformal Inorganic Coating for Low Flammability and Durable Hydrophobicity

Pyrene-imprinted polythiophene sensors for detection of polycyclic aromatic hydrocarbons

Carbon Aerogels with Excellent CO 2 Adsorption Capacity Synthesized from Clay-Reinforced Biobased Chitosan-Polybenzoxazine Nanocomposites

Molecular Design: Network Architecture and Its Impact on the Organization and Mechanics of Peptide-Polyurea Hybrids

Melt Compounding of Thermoplastic Polyurethanes Incorporating 1D and 2D Carbon Nanofillers

Pages